Professional Brake And Clutch Bleeding Kit

Bleeding the brakes by pumping the brake pedal frequently has one big drawback: the piston inside the master cylinder can travel past the slight lip on the bore that has formed with normal usage, possibly damaging the seal. The master cylinder piston will not be moving. If new components have been fitted, or the fluid is contaminated, the system must be bled.

The one-man brake bleeding system — connects to your car’s reservoir with one of the selections of caps provided in this kit. The new brake fluid is pressurised by attaching the  tube to the spare tyre. Then release the brake bleed valves in turn and let the air bubbles and old fluid flush out through the drain tube. Pressure bleeding of brake and clutch hydraulic systems is recommended by most manufacturers.

Features & Benefits:

• Bottle
• 5 x rubber seals
• Cap assembly with tyre connector
• 4 x plastic caps: 25, 27, 44/45, 46mm
• 3 x hoses: 3.5mm inner diameter x 303mm, 5.4mm inner diameter x 303mm, 5.4mm inner diameter x 183mm
• Suitable for one-man operation